Castings practice : the 10 rules of castings / John Campbell.

Each chapter of Professor Cambell's new book Castings Practice will take a look at one of his 10 rules. It is to be expected that the Rules wil one day be taken as an outline or blueprint for an international specification on the methods for making reliable castings.John Cambell has over two decades of experience in the casting industry and is the author of over 40 technical papers and patents. He has become well-known in the foundry industry as the originator of the Cosworth casting process, which is becoming accepted throughout the world as a new production process for the casting

Gespeichert in:
Bibliographische Detailangaben
1. Verfasser:in Campbell, John, MAFS
Ort, Verlag, Jahr Oxford : Elsevier Butterworth-Heinemann , 2004
Umfang1 online resource (218 p.)
ISBN1-281-00894-X
9786611008949
0-08-047641-4
SpracheEnglisch
ZusatzinfoCastings Practice; Contents; Dedication; Preface; Summary; Rule 1. Achieve a good quality melt; 1.1 Background; 1.2 Melting; 1.3 Holding; 1.4 Pouring; 1.5 Melt treatments; 1.5.1 Degassing; 1.5.2 Additions; 1.6 Filtration; 1.6.1 Packed beds; 1.6.2 Alternative varieties of filters; 1.6.3 Practical aspects; Rule 2. Avoid turbulent entrainment (the critical velocity requirement); 2.1 Maximum velocity requirement; 2.2 The 'no fall' requirement; 2.3 Filling system design; 2.3.1 Gravity pouring of open-top moulds; 2.3.2 Gravity pouring of closed moulds; 2.3.3 Horizontal transfer casting
2.3.4 Counter-gravity2.3.5 Surface tension controlled filling; 2.3.6 Inclusion control: filters and traps; 2.3.7 Practical calculation of the filling system; Rule 3. Avoid laminar entrainment of the surface film (the non-stopping, non-reversing condition); 3.1 Continuous expansion of the meniscus; 3.2 Arrest of vertical progress; 3.3 Waterfall flow; 3.4 Horizontal stream flow; 3.5 Hesitation and reversal; Rule 4. Avoid bubble damage; 4.1 Gravity-filled running systems; 4.2 Pumped and low-pressure filling systems; Rule 5. Avoid core blows; 5.1 Background; 5.2 Prevention
Rule 6. Avoid shrinkage damage6.1 Feeding systems design background; 6.1.1 Gravity feeding; 6.1.2 Computer modelling of feeding; 6.1.3 Random perturbations to feeding patterns; 6.1.4 Dangers of solid feeding; 6.1.5 The non-feeding roles of feeders; 6.2 The seven feeding rules; Rule 1: Do not feed; Rule 2: Heat-transfer requirement; Rule 3: Mass-transfer requirement; Rule 4: Junction requirement; Rule 5: Feed path requirement; Rule 6: Pressure gradient requirement; Rule 7: Pressure requirement; 6.3 The new feeding logic; 6.3.1 Background; 6.3.2 The new approach; 6.4 Active feeding
6.5 Freezing systems design6.5.1 External chills; 6.5.2 Internal chills; 6.5.3 Fins; Rule 7. Avoid convection damage; 7.1 Convection: the academic background; 7.2 Convection: the engineering imperatives; 7.3 Convection damage and casting section thickness; 7.4 Countering convection; Rule 8. Reduce segregation damage; Rule 9. Reduce residual stress (the 'no water quench' requirement); 9.1 Introduction; 9.2 Residual stress from casting; 9.3 Residual stress from quenching; 9.4 Distortion; 9.5 Heat treatment developments; 9.6 Epilogue; Rule 10. Provide location points; 10.1 Datums
10.2 Location points10.2.1 Rectilinear systems; 10.2.2 Cylindrical systems; 10.2.3 Trigonal systems; 10.2.4 Thin-walled boxes; 10.3 Location jigs; 10.4 Clamping points; 10.5 Mould design: the practical issues; 10.6 Casting accuracy; 10.7 Tooling accuracy; 10.8 Mould accuracy; 10.9 Summary of factors affecting accuracy; 10.10 Metrology; Appendix; The 1.5 factor; The Bernoulli equation; Rate of pour of steel castings from a bottom-pour ladle; Running system calculation record; Design methodology for investment castings; References; Index
ZusatzinfoEnglish
Online-ZugangEBSCO EBS 2024

Bei Problemen beim Zugriff auf diese Online-Quelle beachten Sie unsere Hinweise zum Zugriff auf lizenzierte Angebote von außerhalb des Campus.

MARC

LEADER 00000nam a2200000Ia 4500
001 99370745807406441
005 20230120004344.0
006 m o d |
007 cr -n---------
008 040302s2004 enka ob 001 0 eng d
010 |z  2004042061 
020 |a 1-281-00894-X 
020 |a 9786611008949 
020 |a 0-08-047641-4 
035 |a (CKB)1000000000350756 
035 |a (EBL)226698 
035 |a (SSID)ssj0000118615 
035 |a (PQKBManifestationID)11146161 
035 |a (PQKBTitleCode)TC0000118615 
035 |a (PQKBWorkID)10052900 
035 |a (PQKB)10934375 
035 |a (MiAaPQ)EBC226698 
035 |a (Au-PeEL)EBL226698 
035 |a (CaPaEBR)ebr10128096 
035 |a (CaONFJC)MIL100894 
035 |a (OCoLC)506960502 
035 |a (EXLCZ)991000000000350756 
040 |a MiAaPQ  |c MiAaPQ  |d MiAaPQ 
041 |a eng 
050 4 |a TS230  |b .C285 2004 
082 0 4 |a 671.2  |2 22 
100 1 |a Campbell, John,  |c MAFS. 
245 1 0 |a Castings practice  |h [electronic resource] :  |b the 10 rules of castings /  |c John Campbell. 
260 |a Oxford :  |b Elsevier Butterworth-Heinemann,  |c 2004. 
300 |a 1 online resource (218 p.) 
336 |a text  |b txt 
337 |a computer  |b c 
338 |a online resource  |b cr 
500 |a Description based upon print version of record. 
505 0 |a Castings Practice; Contents; Dedication; Preface; Summary; Rule 1. Achieve a good quality melt; 1.1 Background; 1.2 Melting; 1.3 Holding; 1.4 Pouring; 1.5 Melt treatments; 1.5.1 Degassing; 1.5.2 Additions; 1.6 Filtration; 1.6.1 Packed beds; 1.6.2 Alternative varieties of filters; 1.6.3 Practical aspects; Rule 2. Avoid turbulent entrainment (the critical velocity requirement); 2.1 Maximum velocity requirement; 2.2 The 'no fall' requirement; 2.3 Filling system design; 2.3.1 Gravity pouring of open-top moulds; 2.3.2 Gravity pouring of closed moulds; 2.3.3 Horizontal transfer casting 
505 8 |a 2.3.4 Counter-gravity2.3.5 Surface tension controlled filling; 2.3.6 Inclusion control: filters and traps; 2.3.7 Practical calculation of the filling system; Rule 3. Avoid laminar entrainment of the surface film (the non-stopping, non-reversing condition); 3.1 Continuous expansion of the meniscus; 3.2 Arrest of vertical progress; 3.3 Waterfall flow; 3.4 Horizontal stream flow; 3.5 Hesitation and reversal; Rule 4. Avoid bubble damage; 4.1 Gravity-filled running systems; 4.2 Pumped and low-pressure filling systems; Rule 5. Avoid core blows; 5.1 Background; 5.2 Prevention 
505 8 |a Rule 6. Avoid shrinkage damage6.1 Feeding systems design background; 6.1.1 Gravity feeding; 6.1.2 Computer modelling of feeding; 6.1.3 Random perturbations to feeding patterns; 6.1.4 Dangers of solid feeding; 6.1.5 The non-feeding roles of feeders; 6.2 The seven feeding rules; Rule 1: Do not feed; Rule 2: Heat-transfer requirement; Rule 3: Mass-transfer requirement; Rule 4: Junction requirement; Rule 5: Feed path requirement; Rule 6: Pressure gradient requirement; Rule 7: Pressure requirement; 6.3 The new feeding logic; 6.3.1 Background; 6.3.2 The new approach; 6.4 Active feeding 
505 8 |a 6.5 Freezing systems design6.5.1 External chills; 6.5.2 Internal chills; 6.5.3 Fins; Rule 7. Avoid convection damage; 7.1 Convection: the academic background; 7.2 Convection: the engineering imperatives; 7.3 Convection damage and casting section thickness; 7.4 Countering convection; Rule 8. Reduce segregation damage; Rule 9. Reduce residual stress (the 'no water quench' requirement); 9.1 Introduction; 9.2 Residual stress from casting; 9.3 Residual stress from quenching; 9.4 Distortion; 9.5 Heat treatment developments; 9.6 Epilogue; Rule 10. Provide location points; 10.1 Datums 
505 8 |a 10.2 Location points10.2.1 Rectilinear systems; 10.2.2 Cylindrical systems; 10.2.3 Trigonal systems; 10.2.4 Thin-walled boxes; 10.3 Location jigs; 10.4 Clamping points; 10.5 Mould design: the practical issues; 10.6 Casting accuracy; 10.7 Tooling accuracy; 10.8 Mould accuracy; 10.9 Summary of factors affecting accuracy; 10.10 Metrology; Appendix; The 1.5 factor; The Bernoulli equation; Rate of pour of steel castings from a bottom-pour ladle; Running system calculation record; Design methodology for investment castings; References; Index 
520 |a Each chapter of Professor Cambell's new book Castings Practice will take a look at one of his 10 rules. It is to be expected that the Rules wil one day be taken as an outline or blueprint for an international specification on the methods for making reliable castings.John Cambell has over two decades of experience in the casting industry and is the author of over 40 technical papers and patents. He has become well-known in the foundry industry as the originator of the Cosworth casting process, which is becoming accepted throughout the world as a new production process for the casting 
546 |a English 
504 |a Includes bibliographical references and index. 
650 0 |a Founding. 
650 0 |a Metal castings. 
776 |z 0-7506-4791-4 
700 1 |a Campbell, John,  |c MAFS.  |t Castings. 
906 |a BOOK 
MAN |a false 
POR |0 2022-01-12 16:10:58 Europe/Berlin  |l EBSCOhost  |w BIE-11998  |y 2021-05-03 13:35:28 Europe/Berlin  |2 https://eu04.alma.exlibrisgroup.com/view/uresolver/49HBZ_BIE/openurl?u.ignore_date_coverage=true&portfolio_pid=53321277440006442&Force_direct=true  |a 53321277440006442  |1 2021-05-03 11:35:28  |k false  |r 61317899290006442  |s EBSCO EBS 2024   |c param  |v BIE-28152  |5 62317899280006442  |d https://hbz-network.userservices.exlibrisgroup.com/view/uresolver/49HBZ_BIE/openurl?u.ignore_date_coverage=true&rft.mms_id=991025831943506442  |b Available  |q 613780000000000072  |e BOOK  |8 53321277440006442 
035 |a (49HBZ_BIE)991025831943506442 
035 |a (49HBZ_NETWORK)99370745807406441